WOODFORD H34-C25 MODEL H34 HEATED SANITARY YARD HYDRANT 25' CORD

WOODFORD H34-C25 MODEL H34 HEATED SANITARY YARD HYDRANT 25' CORD
WOODFORD H34-C25 MODEL H34 HEATED SANITARY YARD HYDRANT 25' CORD
Quantity Price
1 to 11 $581.70
12 and up $523.53
Part #H34-C25
Woodford
H34-C25
Model H34 Heated Sanitary Yard Hydrant, 25-Foot Cord
Genuine Woodford Manufacturing Product. ALL Woodford orders must meet the $25 minimum requirement to ship from their factory.

Freezeless Sanitary Heated Yard Hydrants Model H34
The Woodford Model H34, Low Lead, Sanitary is a non-draining hydrant that features a thermostatically controlled heating element that prevents water in the hydrant from freezing even at temperatures down to 20 degrees below zero. One foot bury depth closed system design. One Length Required. 1 MPT Male Thread Inlet

The Model H34 is a sanitary, frost proof yard hydrant. When the hydrant is shut off, all water is contained in the hydrant and piping system, instead of draining into the sub-soil. The thermostatically controlled heating element keeps the water in the hydrant from freezing even at temperatures down to 20 degrees below zero. An ASSE 1052 approved Model 50HF Backflow Preventer protects the hose connection from backflow contamination in freezing and non-freezing conditions.

The H34 is easy to install, since its connection to the piping system only extends one foot below finished grade. All preventative maintenance procedures and repairs can be completed from the top of unit, without removing hydrant from the source piping.

SPECIFICATIONS: Hydrant is 1057 Approved MODEL 50HF BACKFLOW PREVENTER -
  • ASSE 1052 Approved
  • Listed by IAPMO
  • Field Testable
  • Two Independent Check Valves
  • Drains automatically when hose is removed
  • No spray back

    FEATURES:
  • Heater Element: Thermostatically controlled 65 watt, 120 volt, 60 cycle, low watt density heating element.
  • Electrical Cord:
    • H34 includes 3ft cord
    • H34-C12 includes 12ft cord
    • H34-C25 includes 25ft cord
    Construction: Brass head and heater cap
  • Casing: 1in Galvanized steel pipe
  • Male Inlet: 1in NPT
  • Outlet Nozzle: 3/4in male hose thread
  • Conduit Fitting: 1/2in NPT female
  • Handle: Polycarbonate wheel handle
  • Optional: Metal Hand

    Additional Freight Charges are Required for this Product.