Zurn Z1196 Oil Interceptor with Oil Level Sensor

Zurn Z1196
Oil Interceptor with Oil Level Sensor Acid Resistant coated interior and exterior fabricated steel oil interceptor, with a fiberglass sensor box containing an electronic oil lever sensor (specify right or left side)+, a fiberglass display box with one green power light, red oil level light, audible alarm and junction box. Complete with bronze cleanout plug and visible double wall trap seal, removable combination pressure equalizing/flow diffusing baffle and sediment bucket, horizontal baffle, and vent connections either side. Secured gasketed non-skid cover complete with flow control fitting. Regularly furnished with inlet and outlet in high position.

Oil level sensor
100% steel construction coated with acid resistant epoxy
Removable, combination pressure-equalizing/flow-diffusing baffle sediment bucket

Additional freight charges apply for all Interceptors.

*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
OPTIONS (Check/specify appropriate options)
Options will incur additional cost

Sizes 300, 400, 500, 600, 700, and 800

PREFIXES
Z Acid Resistant Coated Fabricated Steel*

Note:
+1. Installed sensor box is mounted on the left or right hand side of the unit when facing inlet (must be specified).
2. Power supply 120V GFCI.
3. Recommended Installations: Sitting on the floor or recessed in a pit only. (A pit installation requires that a drain or sump pump be installed to keep the pit relatively dry).
4. For pit installation see Form #IT66

**Inlet and outlet sizes shown indicate standard operating sizes and flow control setting. Size #300 and #400 will have 3 [76]connections reduced to 2 [51] standard. Size #700 and #800 will have 4 [102] connections reduced to 3 [76] as standard.