Zurn Z1186 Oil Interceptor

Zurn Z1186 Oil Interceptor
Acid Resistant Coated interior and exterior fabricated steel oil interceptor, bronze cleanout plug and visible double wall trap seal, removable combination pressure equalizing/flow diffusing baffle and sediment bucket, horizontal baffle, adjustable oil draw-off and vent connections either side, secured gasketed non-skid cover, complete with flow control fitting. Regularly furnished with inlet and outlet in high position. Note: Location of outlet from bottom of interceptor cannot be changed.

100% steel construction coated with acid resistant epoxy
Removable combination pressure equalizing/flow diffusing baffle sediment bucket

Additional freight charges apply for all Interceptors.

*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
OPTIONS (Check/specify appropriate options)
Options will incur additional cost

Outlet Size 2" and 3"
Inlet and outlet sizes shown indicate standard operating sizes and flow control setting. Size #300 and #400 will have 3 [76] connections reduced to 2 [51] standard. Size #700 and #800 will have 4 [102] connections reduced to 3 [76] as standard.

PREFIXES
Z Acid Resistant Coated Fabricated Steel*

SUFFIXES
-E Acid Resistant Coated Interior and exterior fabricated steel extension section.
       (Specify 'C' Dim. required) for recessed installation.
-HD Heavy duty traffic cover rated at 10,000 lbs. [4536] Kg. maximum safe live load.
       A 3 [76] minimum extension height is required when heavy-duty cover
       (-HD) option is specified. (Specify 'C' Dim. height required.)
-K Anchor flange 1-3/4 [44] down from top and 2 [51] wide. A 3 [76] minimum
      extension height is required when anchor flange
      (-K) option is specified. (Specify 'C' Dim. height required.)
-KC Anchor flange 1-3/4 [44] down from top and 2 [51] wide with clamp collar.